- Beck Equipment Product Lines -

BUHLER EQUIPMENT - SNOW BLOWER



Buhler Allied YC1080C Snow Blower
The Quick Hitch is attached to your tractor's 3-point assembly as if it were an implement.

You then attach your implement to the Quick Hitch from your tractor seat with ease, speed and safety.

To give you the opportunity to enjoy this advancement, implements shown here are all Quick Hitch compatible.

Shear bolt protection is provided at the sprocket to the main auger and is accessed by removing nuts and cover at the back of the housing.

The first three models up to 74" have open gearboxes. The YC8520 and YC9620Q have oil bath gearboxes and there are two 108" models - the YC1080C has an oil bath gearbox that runs at 1000 rpm while the YC1080D model has a 540 rpm direct drive.

Optional commercial truck chute 7' and 10' on YC1080 models.

See specification chart "Chute Control" and "Chute Deflector" for details on standard or optional controls on all models.

Adjustable cup type skid shoes are standard on all models.
  • Cutting Width: 108" c/w replaceable cutting edge
  • Cutting Height: 41"
  • Fan Dia.: 36"
  • Fan Type: 4 blade c/w replaceable 7 gauge liner
  • Auger Dia.: 2 - 15"
  • Drive: Fan 1000 rpm oil bath
  • Auger: #80 chain
  • Hitch Type: Cat. II & III; Q.H. Cat. III Q.H. narrow
  • Hitch Adjustment: 2 position adjustable
  • Chute Control: hydraulic
  • Chute Deflector: hydraulic
  • Skid Shoes: adjustable replaceable
  • H.P. Req'd: 120 - 180
  • Approx. Weight: 2399 lb


Buhler Allied YC1080D Snow Blower
The Quick Hitch is attached to your tractor's 3-point assembly as if it were an implement.

You then attach your implement to the Quick Hitch from your tractor seat with ease, speed and safety.

To give you the opportunity to enjoy this advancement, implements shown here are all Quick Hitch compatible.

Shear bolt protection is provided at the sprocket to the main auger and is accessed by removing nuts and cover at the back of the housing.

The first three models up to 74" have open gearboxes. The YC8520 and YC9620Q have oil bath gearboxes and there are two 108" models - the YC1080C has an oil bath gearbox that runs at 1000 rpm while the YC1080D model has a 540 rpm direct drive.

Optional commercial truck chute 7' and 10' on YC1080 models.

See specification chart "Chute Control" and "Chute Deflector" for details on standard or optional controls on all models.

Adjustable cup type skid shoes are standard on all models.
  • Cutting Width: 108" c/w replaceable cutting edge
  • Cutting Height: 41"
  • Fan Dia.: 36"
  • Fan Type: 4 blade c/w replaceable 7 gauge liner
  • Auger Dia.: 2 - 15"
  • Drive: Fan 540 rpm direct drive
  • Auger: #80 chain
  • Hitch Type: Cat. II & III; Q.H. Cat. III Q.H. narrow
  • Hitch Adjustment: 2 position adjustable
  • Chute Control: hydraulic
  • Chute Deflector: hydraulic
  • Skid Shoes: adjustable replaceable
  • H.P. Req'd: 120 - 180
  • Approx. Weight: 2315 lb


Buhler Allied YC5010 Snow Blower
The Quick Hitch is attached to your tractor's 3-point assembly as if it were an implement.

You then attach your implement to the Quick Hitch from your tractor seat with ease, speed and safety.

To give you the opportunity to enjoy this advancement, implements shown here are all Quick Hitch compatible.

Shear bolt protection is provided at the sprocket to the main auger and is accessed by removing nuts and cover at the back of the housing.

The first three models up to 74" have open gearboxes. The YC8520 and YC9620Q have oil bath gearboxes and there are two 108" models - the YC1080C has an oil bath gearbox that runs at 1000 rpm while the YC1080D model has a 540 rpm direct drive.

Optional commercial truck chute 7' and 10' on YC1080 models.

See specification chart "Chute Control" and "Chute Deflector" for details on standard or optional controls on all models.

Adjustable cup type skid shoes are standard on all models.
  • Cutting Width: 50"
  • Cutting Height: 25"
  • Fan Dia.: 20"
  • Fan Type: 3 blade (4 blade optional)
  • Auger Dia.: 1 - 13"
  • Drive: Fan: 540 rpm open gear
  • Auger: #50 chain
  • Hitch Type: Cat. I std. Quick Hitch Compatible
  • Hitch Adjustment: 4 position adjustable
  • Chute Control: hand crank (hydraulic optional)
  • Chute Deflector: 6 position adjustable(hydraulic optional)
  • Skid Shoes: adjustable replaceable
  • H.P. Req'd: 15 - 30
  • Approx. Weight: 402 lb


Buhler Allied YC6010 Snow Blower
The Quick Hitch is attached to your tractor's 3-point assembly as if it were an implement.

You then attach your implement to the Quick Hitch from your tractor seat with ease, speed and safety.

To give you the opportunity to enjoy this advancement, implements shown here are all Quick Hitch compatible.

Shear bolt protection is provided at the sprocket to the main auger and is accessed by removing nuts and cover at the back of the housing.

The first three models up to 74" have open gearboxes. The YC8520 and YC9620Q have oil bath gearboxes and there are two 108" models - the YC1080C has an oil bath gearbox that runs at 1000 rpm while the YC1080D model has a 540 rpm direct drive.

Optional commercial truck chute 7' and 10' on YC1080 models.

See specification chart "Chute Control" and "Chute Deflector" for details on standard or optional controls on all models.

Adjustable cup type skid shoes are standard on all models.
  • Cutting Width: 60"
  • Cutting Height: 25"
  • Fan Dia.: 22"
  • Fan Type: 3 blade (4 blade optional)
  • Auger Dia.: 1 - 15"
  • Drive: Fan 540 rpm open gear
  • Auger: #50 chain
  • Hitch Type: Cat. I std. Quick Hitch Compatible
  • Hitch Adjustment: 4 position adjustable
  • Chute Control: hand crank (hydraulic optional)
  • Chute Deflector: 6 position adjustable (hydraulic optional)
  • Skid Shoes: adjustable replaceable
  • H.P. Req'd: 20 - 40
  • Approx. Weight: 450 lb


Buhler Allied YC7420 Snow Blower
The Quick Hitch is attached to your tractor's 3-point assembly as if it were an implement.

You then attach your implement to the Quick Hitch from your tractor seat with ease, speed and safety.

To give you the opportunity to enjoy this advancement, implements shown here are all Quick Hitch compatible.

Shear bolt protection is provided at the sprocket to the main auger and is accessed by removing nuts and cover at the back of the housing.

The first three models up to 74" have open gearboxes. The YC8520 and YC9620Q have oil bath gearboxes and there are two 108" models - the YC1080C has an oil bath gearbox that runs at 1000 rpm while the YC1080D model has a 540 rpm direct drive.

Optional commercial truck chute 7' and 10' on YC1080 models.

See specification chart "Chute Control" and "Chute Deflector" for details on standard or optional controls on all models.

Adjustable cup type skid shoes are standard on all models.
  • Cutting Width: 74"
  • Cutting Height: 30"
  • Fan Dia.: 24"
  • Fan Type: 3 blade (4 blade optional)
  • Auger Dia.: 1 - 15"
  • Drive: Fan 540 rpm open gear
  • Auger: #50 chain
  • Hitch Type: Cat. I std.; Opt. Cat. II std.; Quick Hitch Compatible
  • Hitch Adjustment: 2 position adjustable
  • Chute Control: hydraulic (hand crank optional)
  • Chute Deflector: 6 position adjustable (hydraulic optional)
  • Skid Shoes: adjustable replaceable
  • H.P. Req'd: 40 - 70
  • Approx. Weight: 710 lb


Buhler Allied YC8520 Snow Blower
The Quick Hitch is attached to your tractor's 3-point assembly as if it were an implement.

You then attach your implement to the Quick Hitch from your tractor seat with ease, speed and safety.

To give you the opportunity to enjoy this advancement, implements shown here are all Quick Hitch compatible.

Shear bolt protection is provided at the sprocket to the main auger and is accessed by removing nuts and cover at the back of the housing.

The first three models up to 74" have open gearboxes. The YC8520 and YC9620Q have oil bath gearboxes and there are two 108" models - the YC1080C has an oil bath gearbox that runs at 1000 rpm while the YC1080D model has a 540 rpm direct drive.

Optional commercial truck chute 7' and 10' on YC1080 models.

See specification chart "Chute Control" and "Chute Deflector" for details on standard or optional controls on all models.

Adjustable cup type skid shoes are standard on all models.
  • Cutting Width: 85"
  • Cutting Height: 33"
  • Fan Dia.: 25"
  • Fan Type: 3 blade
  • Auger Dia.: 1 - 20"
  • Drive: Fan 540 rpm oil bath gearbox
  • Auger: #60 chain
  • Hitch Type: Cat. II std.; Cat. II Q.H. std.; Cat. III Q.H. narrow
  • Hitch Adjustment: 2 position adjustable
  • Chute Control: hydraulic (hand crank optional)
  • Chute Deflector: 6 position adjustable (hydraulic optional)
  • Skid Shoes: adjustable replaceable
  • H.P. Req'd: 60 - 90
  • Approx. Weight: 948 lb


Buhler Allied YC9620 Snow Blower
The Quick Hitch is attached to your tractor's 3-point assembly as if it were an implement.

You then attach your implement to the Quick Hitch from your tractor seat with ease, speed and safety.

To give you the opportunity to enjoy this advancement, implements shown here are all Quick Hitch compatible.

Shear bolt protection is provided at the sprocket to the main auger and is accessed by removing nuts and cover at the back of the housing.

The first three models up to 74" have open gearboxes. The YC8520 and YC9620Q have oil bath gearboxes and there are two 108" models - the YC1080C has an oil bath gearbox that runs at 1000 rpm while the YC1080D model has a 540 rpm direct drive.

Optional commercial truck chute 7' and 10' on YC1080 models.

See specification chart "Chute Control" and "Chute Deflector" for details on standard or optional controls on all models.

Adjustable cup type skid shoes are standard on all models.
  • Cutting Width: 96"
  • Cutting Height: 36"
  • Fan Dia.: 34"
  • Fan Type: 3 blade (4 blade optional)
  • Auger Dia.: 2 - 15"
  • Drive: Fan 540 rpm oil bath gearbox
  • Auger: #60 chain
  • Hitch Type: Cat. II std.; Cat. II Q.H. std.; Cat. III Q.H. narrow
  • Hitch Adjustment: fixed
  • Chute Control: hydraulic (hand crank optional)
  • Chute Deflector: 6 position adjustable (hydraulic optional)
  • Skid Shoes: adjustable replaceable
  • H.P. Req'd: 90 - 125
  • Approx. Weight: 1243 lb


Buhler Commercial B6022HSB Snow Blower
For more than a generation, Buhler has been building the most popular snowblowers used on farms, airports and municipalities throughout the North American snow-belt.

Now, all that experience brings you this new line of rugged, commercial blowers to handle more demanding snow clearing jobs.

These hydraulically driven blowers are offered in 60", 74" and 84" sizes and four series.

Oil flow ranges from 13 to 32 gallons per minute, with 2000 P.S.I. to ensure there is a model to match the horsepower of your machine.

A hydraulic motor engages a direct ring gear for smooth, positive rotation of the chute.

The Buhler Blower is totally operated by hydraulics - fan, auger, chute rotator and deflector.

This heavy duty chute is constructed with heavier gauge steel and is lined with a replaceable UHMW poly material for less friction and wear.

The key to efficient snow blowing is the design of the fan and housing. Four blades with tight clearance at the circumference and a replaceable UHMW liner make this an excellent design.

This attachment plate makes your wheel or skid steer loader the best snowblower you could own. The heart and soul of these hydraulic snowblowers is the load sensing manifold which keeps all four functions operating efficiently, even as the snow gets deeper and more packed.

One set of remotes is all you need. Adjustment ports allow you to fine tune the flow and route of oil to ensure that the primary oil supply goes to the fan and auger, secondarily to the chute rotator and deflector. A cushioning feature in the valve body softens the speed of the rotation when it reaches the end of its rotating arc. The remote in-cab control allows the operator to divert oil flow to the chute controls.

This 3 point hitch, PTO driven blower is built with the same durable strength and features of the front mounted hydraulic models shown here.

Equipped with the same chute rotator as the hydraulically driven models, it also features a telescopic hitch, replaceable cutting edge, adjustable skid shoes, 4 blade fan, and replaceable UHMW poly liner in the fan housing and spout. Available in 84" size only.
  • Cutting Width: 60"
  • Cutting Height: 28"
  • Fan Housing: Replaceable UHMW Liner
  • Fan: 4-Blade
  • Fan Dia.: 21.5"
  • Fan Depth: 7.5"
  • Auger Dia.: 15"
  • Auger Center Dia.: 3" od x .150 wall
  • Auger Thickness: 3/8"
  • Drive Fan: Hyd with #80 Chain
  • Drive Auger: Hyd with #60H Chain
  • Body Housing: 10 ga
  • Hitch Type: Skid Steer - fixed
  • Hitch Adustment: No
  • Chute Rotator: Hydraulic - 230
  • Chute Deflector: Hydraulic
  • Cutting Edge: 1/2" x 4" Beveled - replaceable
  • Skid Shoes: Shoe Type - adjustable
  • Truckloading Spout: 13-26 gpm, 2000 psi min.Optional
  • System Controls & Drive: Hyd. Load Sensing Block flow adjustable
  • Hydraulic Req's: 13-26 gpm, 2000 psi Min.
  • Approx. Weight: 1070 lbs


Buhler Commercial B6622HSB Snow Blower
For more than a generation, Buhler has been building the most popular snowblowers used on farms, airports and municipalities throughout the North American snow-belt.

Now, all that experience brings you this new line of rugged, commercial blowers to handle more demanding snow clearing jobs.

These hydraulically driven blowers are offered in 60", 74" and 84" sizes and four series.

Oil flow ranges from 13 to 32 gallons per minute, with 2000 P.S.I. to ensure there is a model to match the horsepower of your machine.

A hydraulic motor engages a direct ring gear for smooth, positive rotation of the chute.

The Buhler Blower is totally operated by hydraulics - fan, auger, chute rotator and deflector.

This heavy duty chute is constructed with heavier gauge steel and is lined with a replaceable UHMW poly material for less friction and wear.

The key to efficient snow blowing is the design of the fan and housing. Four blades with tight clearance at the circumference and a replaceable UHMW liner make this an excellent design.

This attachment plate makes your wheel or skid steer loader the best snowblower you could own. The heart and soul of these hydraulic snowblowers is the load sensing manifold which keeps all four functions operating efficiently, even as the snow gets deeper and more packed.

One set of remotes is all you need. Adjustment ports allow you to fine tune the flow and route of oil to ensure that the primary oil supply goes to the fan and auger, secondarily to the chute rotator and deflector. A cushioning feature in the valve body softens the speed of the rotation when it reaches the end of its rotating arc. The remote in-cab control allows the operator to divert oil flow to the chute controls.

This 3 point hitch, PTO driven blower is built with the same durable strength and features of the front mounted hydraulic models shown here.

Equipped with the same chute rotator as the hydraulically driven models, it also features a telescopic hitch, replaceable cutting edge, adjustable skid shoes, 4 blade fan, and replaceable UHMW poly liner in the fan housing and spout. Available in 84" size only.
  • Cutting Width: 66"
  • Cutting Height: 30"
  • Fan Housing: Replaceable UHMW Liner
  • Fan: 4-Blade
  • Fan Dia.: 21.5"
  • Fan Depth: 7.5"
  • Auger Dia.: 15"
  • Auger Center Dia.: 3" od x .250 wall
  • Auger Thickness: 3/8"
  • Drive Fan: Hyd with #80 chain
  • Drive Auger: Hyd with #60 chain
  • Body Housing: 7 ga
  • Hitch Type: Skid Steer Fixed
  • Hitch Adustment: No
  • Chute Rotator: Hydraulic - 230
  • Chute Deflector: Hydraulic
  • Cutting Edge: 1/2" x 4" Beveled - replaceable
  • Skid Shoes: Shoe Type - adjustable
  • Truckloading Spout: 13-26 gpm, 2000 psi min.Optional
  • System Controls & Drive: Hyd. Load Sensing Block flow adjustable
  • Hydraulic Req's: 13-26 gpm, 2000 psi min.
  • Approx. Weight: 1260 lbs


Buhler Commercial B7422HSB Snow Blower
For more than a generation, Buhler has been building the most popular snowblowers used on farms, airports and municipalities throughout the North American snow-belt.

Now, all that experience brings you this new line of rugged, commercial blowers to handle more demanding snow clearing jobs.

These hydraulically driven blowers are offered in 60", 74" and 84" sizes and four series.

Oil flow ranges from 13 to 32 gallons per minute, with 2000 P.S.I. to ensure there is a model to match the horsepower of your machine.

A hydraulic motor engages a direct ring gear for smooth, positive rotation of the chute.

The Buhler Blower is totally operated by hydraulics - fan, auger, chute rotator and deflector.

This heavy duty chute is constructed with heavier gauge steel and is lined with a replaceable UHMW poly material for less friction and wear.

The key to efficient snow blowing is the design of the fan and housing. Four blades with tight clearance at the circumference and a replaceable UHMW liner make this an excellent design.

This attachment plate makes your wheel or skid steer loader the best snowblower you could own. The heart and soul of these hydraulic snowblowers is the load sensing manifold which keeps all four functions operating efficiently, even as the snow gets deeper and more packed.

One set of remotes is all you need. Adjustment ports allow you to fine tune the flow and route of oil to ensure that the primary oil supply goes to the fan and auger, secondarily to the chute rotator and deflector. A cushioning feature in the valve body softens the speed of the rotation when it reaches the end of its rotating arc. The remote in-cab control allows the operator to divert oil flow to the chute controls.

This 3 point hitch, PTO driven blower is built with the same durable strength and features of the front mounted hydraulic models shown here.

Equipped with the same chute rotator as the hydraulically driven models, it also features a telescopic hitch, replaceable cutting edge, adjustable skid shoes, 4 blade fan, and replaceable UHMW poly liner in the fan housing and spout. Available in 84" size only.
  • Cutting Width: 74"
  • Cutting Height: 30"
  • Fan Housing: Replaceable UHMW Liner
  • Fan: 4-Blade
  • Fan Dia.: 21.5"
  • Fan Depth: 7.5"
  • Auger Dia.: 15"
  • Auger Center Dia.: 3" od x .150 wall
  • Auger Thickness: 3/8"
  • Drive Fan: Hyd with #80 Chain
  • Drive Auger: Hyd with #60H Chain
  • Body Housing: 10 ga
  • Hitch Type: Skid Steer - fixed
  • Hitch Adustment: No
  • Chute Rotator: Hydraulic - 230
  • Chute Deflector: Hydraulic
  • Cutting Edge: 1/2" x 4" Beveled - replaceable
  • Skid Shoes: Shoe Type - adjustable
  • Truckloading Spout: 13-26 gpm, 2000 psi min.Optional
  • System Controls & Drive: Hyd. Load Sensing Block flow adjustable
  • Hydraulic Req's: 13-32 gpm, 2000 psi Min.
  • Approx. Weight: 1178 lbs


Buhler Commercial B7424HSB Snow Blower
For more than a generation, Buhler has been building the most popular snowblowers used on farms, airports and municipalities throughout the North American snow-belt.

Now, all that experience brings you this new line of rugged, commercial blowers to handle more demanding snow clearing jobs.

These hydraulically driven blowers are offered in 60", 74" and 84" sizes and four series.

Oil flow ranges from 13 to 32 gallons per minute, with 2000 P.S.I. to ensure there is a model to match the horsepower of your machine.

A hydraulic motor engages a direct ring gear for smooth, positive rotation of the chute.

The Buhler Blower is totally operated by hydraulics - fan, auger, chute rotator and deflector.

This heavy duty chute is constructed with heavier gauge steel and is lined with a replaceable UHMW poly material for less friction and wear.

The key to efficient snow blowing is the design of the fan and housing. Four blades with tight clearance at the circumference and a replaceable UHMW liner make this an excellent design.

This attachment plate makes your wheel or skid steer loader the best snowblower you could own. The heart and soul of these hydraulic snowblowers is the load sensing manifold which keeps all four functions operating efficiently, even as the snow gets deeper and more packed.

One set of remotes is all you need. Adjustment ports allow you to fine tune the flow and route of oil to ensure that the primary oil supply goes to the fan and auger, secondarily to the chute rotator and deflector. A cushioning feature in the valve body softens the speed of the rotation when it reaches the end of its rotating arc. The remote in-cab control allows the operator to divert oil flow to the chute controls.

This 3 point hitch, PTO driven blower is built with the same durable strength and features of the front mounted hydraulic models shown here.

Equipped with the same chute rotator as the hydraulically driven models, it also features a telescopic hitch, replaceable cutting edge, adjustable skid shoes, 4 blade fan, and replaceable UHMW poly liner in the fan housing and spout. Available in 84" size only.
  • Cutting Width: 74"
  • Cutting Height: 30"
  • Fan Housing: Replaceable UHMW Liner
  • Fan: 4-Blade
  • Fan Dia.: 23.5"
  • Fan Depth: 7.5"
  • Auger Dia.: 15"
  • Auger Center Dia.: 3" od x .150 wall
  • Auger Thickness: 3/8"
  • Drive Fan: Hyd with #80 Chain
  • Drive Auger: Hyd with #60H Chain
  • Body Housing: 10 ga
  • Hitch Type: Skid Steer - fixed
  • Hitch Adjustment: No
  • Chute Rotator: Hydraulic - 230
  • Chute Deflector: Hydraulic
  • Cutting Edge: 1/2" x 4" Beveled - replaceable
  • Skid Shoes: Shoe Type - adjustable
  • Truckloading Spout: 13-26 gpm, 2000 psi min.Optional
  • System Controls & Drive: Hyd. Load Sensing Block flow adjustable
  • Hydraulic Req's: 20-32 gpm, 2000 psi Min.
  • Approx. Weight: 1193 lbs


Buhler Commercial B8424HSB Snow Blower
For more than a generation, Buhler has been building the most popular snowblowers used on farms, airports and municipalities throughout the North American snow-belt.

Now, all that experience brings you this new line of rugged, commercial blowers to handle more demanding snow clearing jobs.

These hydraulically driven blowers are offered in 60", 74" and 84" sizes and four series.

Oil flow ranges from 13 to 32 gallons per minute, with 2000 P.S.I. to ensure there is a model to match the horsepower of your machine.

A hydraulic motor engages a direct ring gear for smooth, positive rotation of the chute.

The Buhler Blower is totally operated by hydraulics - fan, auger, chute rotator and deflector.

This heavy duty chute is constructed with heavier gauge steel and is lined with a replaceable UHMW poly material for less friction and wear.

The key to efficient snow blowing is the design of the fan and housing. Four blades with tight clearance at the circumference and a replaceable UHMW liner make this an excellent design.

This attachment plate makes your wheel or skid steer loader the best snowblower you could own. The heart and soul of these hydraulic snowblowers is the load sensing manifold which keeps all four functions operating efficiently, even as the snow gets deeper and more packed.

One set of remotes is all you need. Adjustment ports allow you to fine tune the flow and route of oil to ensure that the primary oil supply goes to the fan and auger, secondarily to the chute rotator and deflector. A cushioning feature in the valve body softens the speed of the rotation when it reaches the end of its rotating arc. The remote in-cab control allows the operator to divert oil flow to the chute controls.

This 3 point hitch, PTO driven blower is built with the same durable strength and features of the front mounted hydraulic models shown here.

Equipped with the same chute rotator as the hydraulically driven models, it also features a telescopic hitch, replaceable cutting edge, adjustable skid shoes, 4 blade fan, and replaceable UHMW poly liner in the fan housing and spout. Available in 84" size only.
  • Cutting Width: 84"
  • Cutting Height: 30"
  • Fan Housing: Replaceable UHMW Liner
  • Fan: 4-Blade
  • Fan Dia.: 23.5"
  • Fan Depth: 7.5"
  • Auger Dia.: 20"
  • Auger Center Dia.: 3" od x .150 wall
  • Auger Thickness: 3/8"
  • Drive Fan: Hyd with #80 Chain
  • Drive Auger: Hyd with #60H Chain
  • Body Housing: 7 ga
  • Hitch Type: Skid Steer - fixed
  • Hitch Adustment: No
  • Chute Rotator: Hydraulic - 230
  • Chute Deflector: Hydraulic
  • Cutting Edge: 1/2" x 4" Beveled - replaceable
  • Skid Shoes: Shoe Type - adjustable
  • Truckloading Spout: 13-26 gpm, 2000 psi min.Optional
  • System Controls & Drive: Hyd. Load Sensing Block flow adjustable
  • Hydraulic Req's: 16-32 gpm, 2000 psi Min.
  • Approx. Weight: 1290 lbs


Buhler Commercial B84SB (PTO Drive) Snow Blower
For more than a generation, Buhler has been building the most popular snowblowers used on farms, airports and municipalities throughout the North American snow-belt.

Now, all that experience brings you this new line of rugged, commercial blowers to handle more demanding snow clearing jobs.

These hydraulically driven blowers are offered in 60", 74" and 84" sizes and four series.

Oil flow ranges from 13 to 32 gallons per minute, with 2000 P.S.I. to ensure there is a model to match the horsepower of your machine.

A hydraulic motor engages a direct ring gear for smooth, positive rotation of the chute.

The Buhler Blower is totally operated by hydraulics - fan, auger, chute rotator and deflector.

This heavy duty chute is constructed with heavier gauge steel and is lined with a replaceable UHMW poly material for less friction and wear.

The key to efficient snow blowing is the design of the fan and housing. Four blades with tight clearance at the circumference and a replaceable UHMW liner make this an excellent design.

This attachment plate makes your wheel or skid steer loader the best snowblower you could own. The heart and soul of these hydraulic snowblowers is the load sensing manifold which keeps all four functions operating efficiently, even as the snow gets deeper and more packed.

One set of remotes is all you need. Adjustment ports allow you to fine tune the flow and route of oil to ensure that the primary oil supply goes to the fan and auger, secondarily to the chute rotator and deflector. A cushioning feature in the valve body softens the speed of the rotation when it reaches the end of its rotating arc. The remote in-cab control allows the operator to divert oil flow to the chute controls.

This 3 point hitch, PTO driven blower is built with the same durable strength and features of the front mounted hydraulic models shown here.

Equipped with the same chute rotator as the hydraulically driven models, it also features a telescopic hitch, replaceable cutting edge, adjustable skid shoes, 4 blade fan, and replaceable UHMW poly liner in the fan housing and spout. Available in 84" size only.
  • Cutting Width: 84"
  • Cutting Height: 30"
  • Fan Housing: Replaceable UHMW Liner
  • Fan: 4-Blade
  • Fan Dia.: 23.5"
  • Fan Depth: 7.5"
  • Auger Dia.: 20"
  • Auger Center Dia.: 3" od x .150 wall
  • Auger Thickness: 3/8"
  • Drive Fan: PTO Gearbox
  • Drive Auger: 60H Chain
  • Body Housing: 7 ga
  • Hitch Type: Cat. 3 - 3 pt.
  • Hitch Adustment: 3 position
  • Chute Rotator: Hydraulic - 230
  • Chute Deflector: Hydraulic
  • Cutting Edge: 1/2" x 4" Beveled - replaceable
  • Skid Shoes: Shoe Type - adjustable
  • Truckloading Spout: 13-26 gpm, 2000 psi min.Optional
  • System Controls & Drive: PTO w/shear pin
  • Hydraulic Req's: 10 gpm, 1000 psi Min.
  • Approx. Weight: 1307 lbs


Buhler Farm King Y1080C Snow Blower
The Quick Hitch is attached to your tractor's 3-point assembly as if it were an implement.

You then attach your implement to the Quick Hitch from your tractor seat with ease, speed and safety. To give you the opportunity to enjoy this advancement, implements shown here are all Quick Hitch compatible.

The first four models up to 84" have open gearboxes. The model Y840G has an oil bath gearbox. There are two 108" models - the Y1080C has a 1,000 rpm gearbox and the Y1080D features a 540 rpm drive system.

Adjustable cup type skid shoes are standard on all models.
  • Cutting Width: 108" c/w replaceable cutting edge
  • Cutting Height: 41"
  • Fan Dia.: 36"
  • Fan Type: 4 blade c/w replaceable 7 gauge liner
  • Auger Dia.: 2 - 15"
  • Drive: Fan 1000 rpm oil bath
  • Auger: #80 chain
  • Hitch Type: Cat. II & III; Q.H. Cat. III Q.H. narrow
  • Hitch Adjustment: 2 position adjustable
  • Chute Control: hydraulic
  • Chute Deflector: hydraulic
  • Skid Shoes: adjustable replaceable
  • H.P. Req'd: 120 - 180
  • Approx. Weight: 2399 lb


Buhler Farm King Y1080D Snow Blower
The Quick Hitch is attached to your tractor's 3-point assembly as if it were an implement.

You then attach your implement to the Quick Hitch from your tractor seat with ease, speed and safety. To give you the opportunity to enjoy this advancement, implements shown here are all Quick Hitch compatible.

The first four models up to 84" have open gearboxes. The model Y840G has an oil bath gearbox. There are two 108" models - the Y1080C has a 1,000 rpm gearbox and the Y1080D features a 540 rpm drive system.

Adjustable cup type skid shoes are standard on all models.
  • Cutting Width: 180" c/w replaceable cutting edge
  • Cutting Height: 41"
  • Fan Dia.: 36"
  • Fan Type: 4 blade c/w replaceable 7 gauge liner
  • Auger Dia.: 2 - 15"
  • Drive: Fan 540 rpm direct drive
  • Auger: #80 chain
  • Hitch Type: Cat. II & III; Q.H. Cat. III Q.H. narrow
  • Hitch Adjustment: 2 position adjustable
  • Chute Control: hydraulic
  • Chute Deflector: hydraulic
  • Skid Shoes: adjustable replaceable
  • H.P. Req'd: 120 - 180
  • Approx. Weight: 2315 lb


Buhler Farm King Y500 Snow Blower
The Quick Hitch is attached to your tractor's 3-point assembly as if it were an implement.

You then attach your implement to the Quick Hitch from your tractor seat with ease, speed and safety. To give you the opportunity to enjoy this advancement, implements shown here are all Quick Hitch compatible.

The first four models up to 84" have open gearboxes. The model Y840G has an oil bath gearbox. There are two 108" models - the Y1080C has a 1,000 rpm gearbox and the Y1080D features a 540 rpm drive system.

Adjustable cup type skid shoes are standard on all models.
  • Cutting Width: 50"
  • Cutting Height: 25"
  • Fan Dia.: 20"
  • Fan Type: 3 blade (4 blade optional)
  • Auger Dia.: 1 - 13"
  • Drive: Fan - 540 rpm open gear
  • Auger: #50 chain
  • Hitch Type: Cat. I std. Quick Hitch Compatible
  • Hitch Adjustment: 4 position adjustable
  • Chute Control: hand crank (hydraulic optional)
  • Chute Deflector: 6 position adjustable (hydraulic optional)
  • Skid Shoes: adjustable replaceable
  • H.P. Req'd: 15 - 30
  • Approx. Weight: 402 lb


Buhler Farm King Y600 Snow Blower
The Quick Hitch is attached to your tractor's 3-point assembly as if it were an implement.

You then attach your implement to the Quick Hitch from your tractor seat with ease, speed and safety. To give you the opportunity to enjoy this advancement, implements shown here are all Quick Hitch compatible.

The first four models up to 84" have open gearboxes. The model Y840G has an oil bath gearbox. There are two 108" models - the Y1080C has a 1,000 rpm gearbox and the Y1080D features a 540 rpm drive system.

Adjustable cup type skid shoes are standard on all models.
  • Cutting Width: 60"
  • Cutting Height: 25"
  • Fan Dia.: 22"
  • Fan Type: 3 blade (4 blade optional)
  • Auger Dia.: 1 - 15"
  • Drive: Fan - 540 rpm open gear
  • Auger: #50 chain
  • Hitch Type: Cat. I std. Quick Hitch Compatible
  • Hitch Adjustment: 4 position adjustable
  • Chute Control: hand crank (hydraulic optional)
  • Chute Deflector: 6 position adjustable (hydraulic optional)
  • Skid Shoes: adjustable replaceable
  • H.P. Req'd: 20 - 40
  • Approx. Weight: 450 lb


Buhler Farm King Y740 Snow Blower
The Quick Hitch is attached to your tractor's 3-point assembly as if it were an implement.

You then attach your implement to the Quick Hitch from your tractor seat with ease, speed and safety. To give you the opportunity to enjoy this advancement, implements shown here are all Quick Hitch compatible.

The first four models up to 84" have open gearboxes. The model Y840G has an oil bath gearbox. There are two 108" models - the Y1080C has a 1,000 rpm gearbox and the Y1080D features a 540 rpm drive system.

Adjustable cup type skid shoes are standard on all models.
  • Cutting Width: 74"
  • Cutting Height: 30"
  • Fan Dia.: 24"
  • Fan Type: 3 blade (4 blade optional)
  • Auger Dia.: 1 - 15"
  • Drive: Fan 540 rpm open gear
  • Auger: #50 chain
  • Hitch Type: Cat. I std. Opt. Cat. II std. Quick Hitch Compatible
  • Hitch Adjustment: 2 position adjustable
  • Chute Control: hydraulic (hand crank optional)
  • Chute Deflector: 6 position adjustable (hydraulic optional)
  • Skid Shoes: adjustable replaceable
  • H.P. Req'd: 40 - 70
  • Approx. Weight: 710 lb


Buhler Farm King Y840 Snow Blower
The Quick Hitch is attached to your tractor's 3-point assembly as if it were an implement.

You then attach your implement to the Quick Hitch from your tractor seat with ease, speed and safety. To give you the opportunity to enjoy this advancement, implements shown here are all Quick Hitch compatible.

The first four models up to 84" have open gearboxes. The model Y840G has an oil bath gearbox. There are two 108" models - the Y1080C has a 1,000 rpm gearbox and the Y1080D features a 540 rpm drive system.

Adjustable cup type skid shoes are standard on all models.
  • Cutting Width: 84"
  • Cutting Height: 30"
  • Fan Dia.: 24"
  • Fan Type: 3 blade (4 blade optional)
  • Auger Dia.: 1 - 15"
  • Drive: Fan 540 rpm open gear
  • Auger: #50 chain
  • Hitch Type: Cat. II std. Quick Hitch Compatible
  • Hitch Adjustment: 2 position adjustable
  • Chute Control: hydraulic (hand crank optional)
  • Chute Deflector: 6 position adjustable (hydraulic optional)
  • Skid Shoes: adjustable replaceable
  • H.P. Req'd: 60 - 90
  • Approx. Weight: 764 lb


Buhler Farm King Y840G Snow Blower
The Quick Hitch is attached to your tractor's 3-point assembly as if it were an implement.

You then attach your implement to the Quick Hitch from your tractor seat with ease, speed and safety. To give you the opportunity to enjoy this advancement, implements shown here are all Quick Hitch compatible.

The first four models up to 84" have open gearboxes. The model Y840G has an oil bath gearbox. There are two 108" models - the Y1080C has a 1,000 rpm gearbox and the Y1080D features a 540 rpm drive system.

Adjustable cup type skid shoes are standard on all models.
  • Cutting Width: 84"
  • Cutting Height: 30"
  • Fan Dia.: 24"
  • Fan Type: 3 blade (4 blade optional)
  • Auger Dia.: 1 - 15"
  • Drive: Fan 540 rpm oil bath gearbox
  • Auger: #50 chain
  • Hitch Type: Cat. II std. Quick Hitch Compatible
  • Hitch Adjustment: 2 position adjustable
  • Chute Control: hydraulic (hand crank optional)
  • Chute Deflector: 6 position adjustable (hydraulic optional)
  • Skid Shoes: adjustable replaceable
  • H.P. Req'd: 60 - 90
  • Approx. Weight: 800 lb


Buhler Farm King Y960Q Snow Blower
The Quick Hitch is attached to your tractor's 3-point assembly as if it were an implement.

You then attach your implement to the Quick Hitch from your tractor seat with ease, speed and safety. To give you the opportunity to enjoy this advancement, implements shown here are all Quick Hitch compatible.

The first four models up to 84" have open gearboxes. The model Y840G has an oil bath gearbox. There are two 108" models - the Y1080C has a 1,000 rpm gearbox and the Y1080D features a 540 rpm drive system.

Adjustable cup type skid shoes are standard on all models.
  • Cutting Width: 96"
  • Cutting Height: 36"
  • Fan Dia.: 34"
  • Fan Type: 3 blade (4 blade optional)
  • Auger Dia.: 2 - 15"
  • Drive: Fan 540 rpm oil bath gearbox
  • Auger: #60 chain
  • Hitch Type: Cat. II std.; Cat. II Q.H. std.; Cat. III Q.H. std. narrow
  • Hitch Adjustment: fixed
  • Chute Control: hydraulic (hand crank optional)
  • Chute Deflector: 6 position adjustable (hydraulic optional)
  • Skid Shoes: adjustable replaceable
  • H.P. Req'd: 90 - 125
  • Approx. Weight: 1243 lb

Used Equipment | New Equipment | Current Specials| Store Locations| Store Hours | E-Mail Us
 
Beck Implement, Inc.
50 Center Ave. S - Elgin, MN 55932-0372
Ph: 507-876-2122 - Fax: 507-876-2860